You can synchronize your Z Cam E2 with Tentacle SYNC E or ORIGINAL timecode generator, TIMEBAR timecode display & TRACK E audio recorder. For more information about Tentacle syncing workflow with the Setup App, click here.
Proceed as follows:
- Set camera and Tentacle device to the same frame rate
- Sync your Tentacle and set the Output Volume in the app to LINE or AUTO
- Connect the Z Cam timecode adapter to the COM input on the back of the camera body and the Tentacle device to that adapter
- Set camera menu:
- Menu > Connection > UART > Linear LTC
- Menu > Record > Time Code > Time Code Source > External
-
Menu > Record > Time Code > HDMI Display
- When everything is working correctly the signal indicator of the timecode adapter will turn green (Red for error)
Recommended cable & adapter
Z Cam E2 timecode adapter with DB9 to CTRL port cable + C06 Tentacle to BNC-Timecode Cable
Note:
We cannot guarantee the completeness or accuracy of information provided by third-party manufacturers, so we recommend that you contact these third-party manufacturers directly if you have any questions regarding their devices.