Setup Tentacle:
- Open the Setup App and set the frame rate of your Tentacle (same as camera)
- Sync your Tentacle device so it's outputting timecode (blinking green)
- Go to the BMPC Menu > Settings > Camera > Set the frame rate
- Go to the BMPC Menu > Settings > Audio > set Input Level (Line or Mic)
- Connect your Tentacle with the Tentacle to 6.3 mm jack cable to the Mic IN on the side panel of the Blackmagic Cinema Camera
For more information on the Tentacle Setup App go here.
Note:
We cannot guarantee the completeness or accuracy of information provided by third-party manufacturers, so we recommend that you contact these third-party manufacturers directly if you have any questions regarding their devices.