The Canon C200 camera doesn't have a dedicated timecode input, but you can record audio timecode from any Tentacle timecode generator SYNC E & ORIGINAL, TRACK E audio recorder or TIMEBAR timecode display to one of the camera's audio channels. For more information about Tentacle syncing workflow with the Setup App, click here.
Proceed as follows:
- Set Tentacle device and camera to the same frame rate
- Sync your Tentacle and set the Output Volume in the app to MIC or AUTO
- Connect your Tentacle to one of your camera's audio inputs
Recommended cables
C07 Tentacle to DSLR-Timecode Cable for the 3.5 mm Mic input
C04 Tentacle to XLR-Timecode Cable for the XLR Mic input
Setup Canon C200:
Please note that you can assign the audio channels on the C200 in the Menu -> Audio Setup -> Select CH1/CH2 Input OR Select CH3/4 Input.
- If you are using the 3.5 mm mic input select MIC Terminal as the input for CH3 and CH4 . Set the recording format to RAW or XF-AVC, or set it to MP4 and then set the correct volume in the C200's Menu -> Recording/Media Setup -> Audio Setup -> Audio Rec Level CH3/CH4
- For the XLR setup use the audio level switches and dials on the back of the camera body to adjust the audio timecode level so that it is not clipping.
Note:
We cannot guarantee the completeness or accuracy of information provided by third-party manufacturers, so we recommend that you contact these third-party manufacturers directly if you have any questions regarding their devices.
When using the 3.5 mm mic input of the C200 the built-in microphone of the Tentacle will not be supplied with phantom or another kind of plugin power and therefore won't work.