If you don’t have a mobile device at hand, you can synchronize Sync E units with each other via the included 3.5mm cable through the mini jack port as well.
- Start one Tentacle in Green Mode (master) and all other Tentacles in Red Mode (JamSync).
- Consecutively, connect all Tentacles in Red Mode to the one Tentacle in Green Mode with the mini jack cable that comes with your SYNC E. Each SYNC E connected to the "Master" will change from Red into Green Mode. Now all devices are in sync and flashing green simultaneously on the first frame.
Additional information:
You can use an external timecode source to define a master and then follow from step 2. To synchronize all your devices to an external timecode.
