The microphone input can be used to jam-sync your TRACK E with timecode from any external LTC (SMPTE 12 M Standard) timecode source via cable.
Proceed as follows:
- Switch on your TRACK E
- Jam-sync it via the Mic Input (mini jack) as long as the TRACK E is not occupied with other actions (e.g. wireless Sync via the app or start a recording)
- The status LED will blink green for a short period, once it's jammed by the external timecode
- To synchronize the TRACK E again, switch it off once briefly and proceed as described above
Recommended Cables
5-Pin Lemo to Tentacle-Timecode Cable
Tentacle to BNC cable 90°-Timecode Cable
Tentacle to Straight BNC-Timecode Cable
Tentacle to DIN 1.0/2.3-Timecode Cable