Tentacle SYNC E & ORIGINAL timecode generators can be started in two operating modes.
Flashing red:
- Pull down the slide switch shortly (approx. 1 sec.)
- The Status LED is flashing red now
- Your Tentacle device is waiting to be jam-synced by the Setup App or an external timecode source
- It is not outputting timecode
- Sync wirelessly via app or connect a timecode source to the 3.5 mm TC In/Out of the Tentacle
Flashing green:
- Pull down the slide switch
- The Status LED is flashing green (> 3 sec.)
- It fetches the „Time of Day“ from the build-in RTC (Real Time Clock), loads it into the timecode generator and starts generating timecode
- Your Tentacle device is outputting timecode and can send timecode to other recording devices via cable